Garage Door Off The Truck

How to fix your Garage Door off the Truck?

If you have an automatic garage door, you must be aware of the common problem of your garage door off the truck. Such a garage door won’t only function properly but can also cause you serious injuries or damage to your property. Are you confused about what to do in such cases?  Here is a complete guide about how to fix this problem.

Things you will need:

  • Rubber mallet
  • Locking pliers
  • Pliers

Steps to fix your garage door off the truck:

Follow these steps to fix your garage door

Disconnect power supply:

Start with disconnecting your door from the power supply and opener. Engage with the door manually by pulling the rope hanging down from the motor.

Align the door:

After disconnecting from the power supply and opener. Align the door manually locking at a place with grip.

Open the truck:

Use a pair of pliers to open the truck and make room for the roller, then put the roller to its place.

Ensure the wheel back on truck:

Securing the truck with pliers make sure to hold the outer end of truck with pliers and pull it in such a way that the wheel gets back on the truck.

Close the truck:

After positioning the wheel on the truck use a rubber mallet to knock it on the right place at truck bringing the door back to its place.

Testing manually:

Now check the working and balance of the door manually. Remove the pliers and move the door up and down with the help of your hands.

Connect power supply and opener:

Now reconnect the power supply and opener with your garage door. Check it with a remote.

By following these tips you would be able to fix your garage gate that is off the truck but if you are still facing any trouble in opening and closing of your garage door, go for a technical assistance.